1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 382Get this manual
If the gauge lights do not turn on or if the warning horn does not sound for 12 second, test the gauge and wiring as described in Circuit Verification, Instrument Harness, this section3To test the instrument harness warning circuits, turn the engine key switch to ON position TACH
TRIM SNOR
4Move tester TACH ONOFF switch to ON position
[]] 5Press the tester NO OIL buttonThe gauge NO OIL light should turn on for 30 seconds, and the warning horn should sound for 10 seconds6After waiting for NO OIL light to turn off, press the OVERHEAT buttonThe appropriate light should turn on, and you should find the same test results as Step 5Then check the CHECK ENGINE and LOW OIL circuits If the gauge lights do not stay on for 30 seconds, troubleshoot the instrument harness gray circuit for an open If one or more gauge lights do not turn on, troubleshoot the corresponding circuit for an open in the instrument harnessNO OILTanlYellow Circuit WATER TEMPTan Circuit CHECK ENGINETanOrange Circuit LOW OILTanBlack Circuit Tachometer Function 1Turn the engine key switch to ON positionNO OIL