1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 360Get this manual

1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 360

20 Assembly

1 1If Note

removed, apply O'IC Locquic Primer and O'IC Screw Lock to the brush card screws before installing
I 1Correctly route the brush leads, and install the springs and brushesCompress the springs with modified putty knife303548

INotel Incorrect orientation of brushes could damage the starter or cause reverse rotation

2Apply O'IC Extreme Pressure Grease to the gear housing armature bearing Install the thrust washer and armature
3Orient the starter framethe long alignment mark will match the mark next to the positive terminal stud on the gear housing
1221 1231

Back to 1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128