1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 305Get this manual
Disassembly 1Remove the propeller and mounting hardwareInspect the propeller for spun hub1Jl 2Remove the oil level plugthen the drainlfill plugand IJ drain the lube from the gearcase into containerInspect the lube and the magnets on the plugs for metal chipsThe presence of small metal chips can indicate normal wear of the gears, bearings, or shafts within the gearcaseLarge metal chips can indicate extensive internal damageMake note for future reference while inspecting internal componentsInspect the drained lubricant for water or burned odorWater in the lubricant will give it milky appearanceOverheating will give the lubricant black color and burned odor1sl1gl 3The propeller shaft bearing housing is held in the 11 gearcase by screws, washers, and retainersThe retainers are behind the outer rim of the housingRemove the screws, washers, and retainers f10l f11l 4Remove the propeller shaft bearing housing from the