1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 299Get this manual
124 29Oil, then install the thrust bearing washer on the hub of the reverse gear1251 30 and large thrust
Apply CIVIC Needle Bearing Assembly Grease to the small thrust washer Place the small thrust washer in recess of reverse gearSlide the reverse gear onto the propeller shaft until it engages the pinion
31Carefully apply CIVIC Gasket Sealing Compound to the a-ring flange and aft support flange of the bearing housingDo not allow sealer to contact either forward thrust surface or bearings in the housingInstall the housing in the gearcase with screw holes in vertical position and anode facing downPress the bearing housing into the gearcase and tap the housing with soft face mallet to seat the a-ring