1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 289Get this manual
12Reach inside the gearcase and remove the pinion and pinion nutRemove any loose needle bearings that might interfere with removal of the forward gear
13Push down on the shift rod to engage REVERSE gearUnthread the shift rod from the detent leverRemove the six screws, shift rod, and cover assembly from the gearcaseDiscard the cover gasketRemove the two O-rings from inside the cover and discard14Remove the propeller shaft assembly from the gearcaseCOA3560
15Insert small screwdriver under one end of the clutch dog spring and remove it from the groove by unwrapping it from around the clutch dogDiscard the spring16Push the pin out of the clutch dogThe bearing housing assembly will now pull out of the end of the propeller shaft, and the clutch dog will slide off the splines