1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 287Get this manual
Disassembly 1Remove the propeller and mounting hardwareInspect the propeller for spun hub IJJ 2Remove the oil level plugthen the drainlfill plugand
drain the lube from the gearcase into containerInspect the lube and the magnets on the plugs for metal chipsThe presence of small metal chips can indicate normal wear of the gears, bearings, or shafts within the gearcaseLarge metal chips can indicate extensive internal damageMake note for future reference while inspecting internal componentsInspect the drained lubricant for water or burned odorWater in the lubricant will give it milky appearanceOverheating will give the lubricant black color and burned odor3Remove the two screws, washers, and retainers holding the propeller shaft bearing housing