1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 275Get this manual

1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 275

Installation 1Thread the starboard end of the tilt tube into the spacer2Thread the adapter onto the port end of the tilt tubef71 3a wood or leather mallet, tap the tilt tube into proper position [!] 4Be sure the lock tab is in correct positionIgl Igl

5Install the starboard locknutReplace the locknut if definite resistance is not felt6Torque the starboard tilt tube nut to 50-54 ftIbs(68-73 Nm), then loosen nut Va to 14 turn

Back to 1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128