1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 272Get this manual
1141 6Install the adapter housing on the outer exhaust housing Align the water tube7Loosely install the small retaining screws 8Lubricate the upper mount with soapy water and push into place in the adapter housingThe mount radius must face aft and the "TOP" mark must face up
16 9Apply Locquic Primer and OMC Nut Lock to the upper
mount plate screws and install the plate and screws looselyInstall the ground lead and star washer under the forward starboard screw
f16l 10Align the outer exhaust housing and adapter by placing two powerhead mounting screws through their holesr:J7l 11Torque the four mount plate screws to 22-24 ftIbs(30-33 f181 12Torque the small adapter to exhaust housing screws to 60-84 inIbs(7-9 Nm)r,gl 13If removed, coat the lower mounts with soapy water and press into the exhaust housingNotice one side is identifiedOUTSIDE