1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 271Get this manual
[!] 7Remove the lower mount covers as necessary19l8Remove the lower mount assemblies as necessarytJ cate with soapy water and carefully pry at both endsLubri9Refer to Cleaning and Inspection, at the beginning of this sectionAssembly f1Ol1Assemble the water tube, O-ring, and coil spacer Slide the water tube through hole in the inner exhaust housing2Lightly coat both sides of new inner exhaust housing gasket with OMC Gasket Sealing Compound and install it'1'1l3Install the inner exhaust housingTorque the thirteen screws to 60-84 inIbs(7-9 Nm)f1214If removed, install new lower seal, inner exhaust housingCoat the seal inside diameter with OMC Adhesive M13649