1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 268Get this manual
r:Jsl 10If removed, install new inner exhaust housing sealApply OMC Adhesive to the seal groove r:;-;J 11Clean and degrease the adapter housing and outer exhaust housing mating surfaces with OMC Cleaning SolventApply OMC Gel-Seal I to the adapter flange of the outer exhaust housingf171 12Install the adapter housing on the outer exhaust housingAlign the water tubeLoosely install the small retaining screws13Lubricate the upper mount with soapy water and push into place in the adapter housingThe mount radius must face aft and the "TOP" mark must face up14Apply Locquic Primer and OMC Nut Lock to the upper mount plate screws and install the plate and screws looselyInstall the ground lead and star washer under the forward starboard screw