1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 267Get this manual

1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 267

[!] 9Remove the lower mount covers as necessary19l 10Remove the lower mount assemblies as necessaryLubricate with soapy water and carefully pry at both ends11Refer to Cleaning and Inspection, at the beginning of this sectionAssembly
1Lightly coat both sides of new gasket with OMC Gasket Sealing Compound and position the gasket and water plate
Apply OMC Gasket Sealing Compound to the retaining screws and torque them to 60-84 inIbs(7-9 Nm)
3Coat new cover gasket with OMC Gasket Sealing Compound4Place the gasket and cover on the water plater:J1l 5Torque the cover retaining screws to 60-84 inIbsNm)

Back to 1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128