1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 259Get this manual
f71 7If required, remove the screws, stern bracket to trim manifold, and remove the trim and tilt unit V6, va ModelsRemove the second tilt cylinder thrust rod 8For trim and tilt unit servicing information, refer to Section 9Assembly
r:::J Before proceeding, be sure all components have been
thoroughly cleanedReplace any seals that have been removedInspect all thrust washers and bushings for evidence of deteriorationf81 1If removed, install an upper steering shaft bushing, lower seal and upper seal in the swivel bracketBoth seal lips face out Coat seal's outside diameter with OMC Gasket Sealing Compound Coat the bushing and seal lips with OMC Triple-Guard grease