1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 257Get this manual

1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 257


1OInstall the starboard locknutReplace locknut if definite resistance is not felt
1251 '" 11Torque starboard tilt tube nut to 50-54 ftIbsi (68-73 Nm), then loosen nut 1a to 14 turn1261 12Install the tilt cam and collar on the tilt tube127 13Install the steering shaft and thrust washer14Install the steering shaft keeperApply OMC Locquic Primer and OMC Nut Lock to the splines of the steering shaft and lower mount bracket129 15Install the lower mount bracket and new locking nut with its unstaked side facing the mount bracketAlign the bracket with the steering arm and torque the nut to:

Back to 1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128