1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 254Get this manual
f81 7Thread the adapter from OMC Steering Tube Service Kit, PIN 434523, onto the port end of the tilt tubeThread OMC Slide Hammer, PIN 432128, into the adapter until at least in(51 mm) of thread are engagedPull the tilt tube from the stern brackets [!] 8Remove the two tilt tube washers9Remove the anode1.J1l 10Remove the swivel bracketInspect and, if necessary, replace the tilt tube bushingsf121 11 Remove the trim sender unit from the port stern bracket and pull its wires through the braided tube