1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 232Get this manual
40 COA1373
1401 40Using OMCRope Threading Tool, PI N
rope through the starter handle
378774, thread the
41Place the starter rope in the rope anchorPosition the anchor in the handleUntie the knot and allow rope to recoil into housing42Position the starter lockout lever assembly on the housingTorque retaining screws to 60-84 inIbs(7-9 Nm)
43Inspect the starter lockout levers for damage and wear
44If required, replace the lockout components as follows: Coat the shaft with OMC Triple-Guard grease Place the thicker flat washer on shaft Place lower lockout lever Place two springs