1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 218Get this manual
1451 55Install new intake manifold gasket(s)dryInstall intake manifold(s)V6, V8install upper manifold first, then the lowerTorque all screws to 60-84 inIbs(7-9 Nm)
56vathoroughly clean the torsional damper and crankshaft tapers with OMC Cleaning Solvent and let air dry1461 57va
- install the torsional damperCoat the threads of the nut with OMC Gasket Sealing Compound, and install it with the washer face toward the damperHold the nut with 1314 inwrench, and torque the crankshaft using OMC Holding Fixture, PIN 314438Torque nut to 148-152 ftIbs(201-207 Nm)58Install the complete ignition, electrical, and fuel systems'" To prevent fire and explosion hazard, make sure all electrical and ignition wiring is routed and clamped in original positions