1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 216Get this manual

1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 216

f31l 38Tighten the rod cap screws to torque of 25-30 inIbsNm) 39Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using the following procedure: Position frame onto the connecting rod so the contact area of the jaw is centered in the side of the rod Tighten forcing screw until jaws contact connecting rod Slide frame down until adjustment stop contacts the connecting rodThe groove lines on the jaws must be centered on the rodcrankpin diameter
INotel The

squarely In position
must be followed to assure frame is

1341 40Tighten the forcing screw to torque of 23 inIbs(2,5 Nm)

Back to 1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128