1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 213Get this manual
16Apply OMC Needle Bearing Assembly Grease to the 33 wrist pin bearingsInstall the bearings in the wrist pin boreAlign the bearings in the bore using OMC Wrist Pin Bearing Tool, PIN 338646
17Place the two wrist pin thrust washers on the tool with their flat sides facing out18Place the piston in OMC Piston Cradle, PIN 326572, with bottom of piston facing downOil the wrist pin bore and wrist pinPlace connecting rod assembly in pistonBe sure oil hole in connecting rod is facing up19Install the wrist pin through the piston and connecting rod, pushing the tool out through the piston