1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 212Get this manual
[] 7Using retaining ring pliers, install lower main bearing retaining ring with sharp edge of ring facing out[] 8Lightly coat outside diameter of new crankshaft seal with OMC Gasket Sealing CompoundUsing OMC Seal Installer, PIN 325453, install seal in lower crankcase head with extended seal lip facing downCoat the lips of the seal with OMC TripleGuard grease9Lightly coat two new O-rings with OMC Triple-Guard grease and install on lower crankcase head[] 10Using two OMCGuide Pins, PIN 383175, slide crankcase head onto crankshaft[] 11Apply OMC Nut Lock to the threads of four new bearing retainer screws and torque to 96-120 inIbs(11-14 Nm) I1Q]
12Lightly coat the outside diameter of new seal with OMC Gasket Sealing CompoundUse flat tool to install seal flush in upper crankcase head, lip facing downCoat the seal lip with OMC Triple-Guard grease