1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 207Get this manual
20 20Using an appropriate bearing separator, support the lower bearing and press it off the crankshaftIf the lower main bearing is removed from the crankshaft, it must be discardedDo not reuse itf211 21To remove the upper crankshaft seal, use drift punch as shownRemove and discard two crankcase head O-rings
22 22Remove crankcase seal rings for inspection23 ?3Rer:nove center main bearings and split sleeves for
inspection
241 24Using an appropriate ring expander, remove all piston
rings from pistonsDiscard the rings
25 25Using tool as drawn on Page 4-6, or OMCRetaining Ring Pliers, PIN 325937; remove all wrist pin retaining ringsDiscard retaining rings