1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 206Get this manual
f131 12Using one hand to support the piston, remove the rod cap screws with your other handReattach each rod cap to its rod as soon as the piston is removedEach cap is unique and can only be installed on its mated rodDo not allow rod to contact inside edge of pistonIdentify all internal components so that if reused they can be reinstalled in their original positions
13Repeat Steps 11 and 12 for each remaining piston and connecting rod1141 14Carefully, lift the crankshaft straight up and remove itf15l 15If the lower crankcase head is to be resealed or the lower main bearing replaced, remove the four bearing retainer screwsWhile rotating the crankcase head, gently tap on the flange and remove the headf16l 16To remove the lower crankshaft seal, use drift punch as shownRemove and discard two crankcase head a-rings