1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 205Get this manual
f61 5Loosen in stages and remove the main bearing screwsUpper port screw is removed with 3S inAllen socketr:;J 6Using tool as drawn on page 4-8, or equivalent, push crankcase taper pin toward intake manifold surfaceDo not use any tool smaller than the taper pin bore to remove the pin 1sl 7Using rawhide or rubber mallet, tap upward on crankshaft
to separate crankcase and cylinder block
[! 8Lift crankcase straight up and remove itr,Ql 9Loosen in stages and remove cylinder head retaining screws, and remove the cylinder headsr.t1l 10Using an indelible marker, identify each connecting rod cap by cylinder numberRod No.1 is closest to the flywheelr:J21 11Using OMC Torquing Socket, PIN 331638, loosen in stages the rod cap retaining screwsDo not remove the screws