1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 161Get this manual
Output TestsV6 ill plugs installed and torqued in the cylinder headIf necesI:A All cranking output tests must be performed with spark
sary to remove the spark plugs, be sure to keep the spark tester away from open spark plug holes
STEPTOTAL OUTPUT TEST
1Twist and remove all spark plug leads
tJ Connect tester leads to the spark plug leadsSecure tester clip
to clean engine groundTo prevent possible arcing of high voltage, route tester leads at least in(51 mm) from any metal surface
2Adjust the gap on the spark tester to
i or spark tester during cranking tests
To avoid possible shock hazard, do not handle ignition coils