1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 139Get this manual
Amphenol Connector Servicing
INotel The Amphenopin and socket terminals are notthe same size as Deutsch pin and socket terminalsYou cannot interchange themTerminal Removal 1To remove terminal from the plug or receptacle, lubricate both ends of the cavity with isopropyl alcohol
Pick the proper tool for the service being perfo rmed:
OVIC Pin Remover, PI 322698
OVIC Socket Remover, PI 322699 OVIC Crimping Pliers, PIN 322696 OVIC Insert Tool, PIN 322697
2Place the plug or receptacle against the edge of flat surface with clearance behind connector for terminal to be pushed outPush terminal from connector with tool or
3Pin and socket terminals may be replaced if damagedStrip in (6 mm) insulation from wire and crimp new terminal onto wire at point with crimping pliersTerminal Installation 4Connect the plug and receptacle before installing terminalApply isopropyl alcohol to connectors, align arrows, and push together5Apply isopropyl alcohol to the terminal cavity