1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 105Get this manual

1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 105

Assembly

1Install calibration pocket gasket and cover, and torque screws to 10-15 inIbs(1,1-1,7 Nm)

2Install slow speed needle and springTurn in needle until it bottoms out, then back it out for initial setting 1252112 turns 1303112 turns 200225tu rns 2503002'2 turns

3Install intermediate air bleed orifice tighten securely
in main body and

4Install side cover with new gasket, and torque screws to 24-30 inIbs(3-4 Nm)

Back to 1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128