1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 100Get this manual
With lever in run positionno fluid should enter inlet fittingWith lever in prime positionfluid should come out both outlet fittings
[[] 3To inspect or replace internal components, remove the four solenoid cover screws4When assembling solenoid, back out screws in their holes to engage original threadsthen, tighten securelyInstallation 1Attach purplewhite leads and three hosesSecure large hose with tie strap2Install solenoid and bracketPosition ground lead under the inside bracket screwpumpPosition the vacuum switch ground lead 3Install the and star washer under the pump bracket screw
In4Check for leaks by connecting fuel tank hose to motor and
squeezing primer bulb until definite pressure is felt in the bulb
Fuel Enrichment Switch Servicing Function Test