1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 53Get this manual
Synchronization and Linkage Adjustments 125WT, V6, va
It is important that this step-by-step procedure be followed in sequence and be performed exactly as written to ensure consistent engine idling and smooth operation throughout the RPM rangethe cable trunnion pocket before beginning this procedure
r::-=J Remove the throttle cable from the throttle control arm and
Timing Pointer
1Remove all spark plugs'1l 2Center the timing pointer Rotate the flywheel in clockwise direction until the cast-in TOC mark is approximately 1'2 in(4 cm) past the timing pointerf21 3Install OMC Piston Stop, PIN 384887, in No.1 spark plug '-=I hole and turn in center portion until it contacts the No.1 pistonLock the tool in place with ring '1l 4While holding the flywheel firmly against the tool, mark the flywheel directly across from the pointerConsider this mark A"II