1996 Johnson Evinrude "ED" 90 LV 125C, 130, 200, 225, 250 Service Manual, P/N 507128, Page 40Get this manual
AnodesTesting and Replacement Erosion or disintegration in salt or brackish water indicates the anodes are performing their functionThe anodes should be inspected at intervals and replaced when necessary, or corrosion of the engine will increaseIf any anode has been reduced to 03 its original size (113 eroded), it must be replaced!
Test for proper installation of the anodeCalibrate an ohmmeter on high ohms scaleConnect one meter lead to powerhead ground and the other lead to the anodeBe su re the surface of the anode is clean to make good contactThe ohmmeter should show low reading If not, remove the anode and clean the area where the anode is installedThe mounting screws and the anode itself should also be cleanedInstall and retest