1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126, Page 241Get this manual
Stator Resistance Tests INotel Disconnect battery cables before proceeding with this
1Disconnect stator yellow and yellowgray leads from terminal board
2Calibrate ohmmeter on appropriate scaleConnect one ohmmeter lead to stator yellow lead and the other ohmmeter lead to stator yellowgray lead Refer to chart below for the correct value for your engine and stator combination Repair or replace stator if reading is not correctDR4033
rn 3To leadsCalibrategrounded condition, disconnect Concheck for both ohmmeter ohmmeter on appropriate scalenect one ohmmeter lead to clean engine ground and the other ohmmeter lead alternately to both stator leads Ohmmeter should show high reading If ohmmeter shows low reading, stator is grounded and should be repaired or replacedRefer to Stator Servicing, Section 3I Note After replacing the stator and charge coil assembly, verify