1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126, Page 219Get this manual

1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126, Page 219

r,;J r:;J 9Assemble remaining shims, new tab-lock washer, and impeller nut onto driveshaftTorque impeller nut to 16-18 ftIbs(22-24 Nm)Use new tab-lock washer each time, and bend tabs around driveshaft nut to secure t!J Gasket Sealing Compound to threads of six retaining screws
and install them finger tight only
r:;] 10Assemble intake housing to main housingApply OMC

Check for any rubbing or binding between the casing liner and impellerIf clearance is greater on one side, verify that the intake housing is centeredTorque screws in crisscross pattern to 10-12 ftIbs(14-16 Nm)
GJ 11Repeat Step to verify adjustmentGate Adjustment

1Move remote control handle to NEUTRAL detentr;J 2Hold reverse gate up and check for proper clearance between reverse gate and water flow passage:

Back to 1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126