1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126, Page 216Get this manual
Assembly 1If the reverse gate was removed during disassembly, install reverse gatebushingsand shafts to jet housingPosition shafts so holes align with holes where retaining screws make contact2Torque screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely3Place roller into cam in position shownThe roller will not 4Place cam roller on reverse gate stud, and torque nut to 60-84 inIbs(7-9 Nm)5Install bushing