1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126, Page 198Get this manual
11 14156
5Lightly apply OIVIC Triple-Guard grease to new O-ringInstall the O-ring in top groove of the bearing housing
INote Do not install the O-ring in the bearing
Driveshaft Servicing
housing's bottom grooveThe bottom groove is an oil passageGearcase damage could result
1To separate the upper driveshaft from the lower driveshaft, remove the roll pinReplace the damaged component
rn theTo assemble theupper driveshaftthe driveshaft retainer 2driveshaft, install into groove of the rn 3Install holes upper driveshaft into the lower driveshaft, the in the driveshaft retainer and the lower aligning the
driveshaft
4Install the roll pin:
V4flush V6to dimension shown Driveshaft Shimming Using Tool, PIN 393185