1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126, Page 194Get this manual
f151 14Push down on the shift rod to engage REVERSE gear positionUnthread the shift rod from the detent leverRemove the six screws, shift rod, and cover assembly from the gearcaseDiscard the cover gasketRemove and discard the two O-rings from inside the cover15Remove the propeller shaft assembly from the gearcase1,7l 16Insert small screwdriver under one end of the clutch dog spring and remove it from the groove by unwrapping it from around the clutch dogDiscard the spring1,"81 17Push the pin out ofthe clutch dogThe bearing housing assembly will now pull out of the end of the propeller shaft and the clutch dog will slide off the splines18
COA3561
1191 18Pull the forward gearthrust bearingand thrust
washer off the bearing housing