1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126, Page 187Get this manual
3Place the a-ring Q) in groove in the impeller housing4Lightly coat the exterior of the impeller cup with OMC Gasket Sealing CompoundInstall the cup in the impeller housingrJl5the water tube grommet facing up6Install the impeller housing cover
with the inside taper
f817Apply OMC Adhesive sealant to flat side of the impeller housing grommet j)Install the grommet, flat side down
L!J rotation, install the impeller into the liner with slot for impeller
cam facing out
Inl 8Lightly coat the liner with oilWith counterclockwise
19l9Run
tJ groove, and install the special shaped a-ring seal Installation
a thin bead of OMC Adhesive sealant in the seal
r::;l1Apply OMC Gasket Sealing Compound to both sides of new impeller plate gasket CDInstall the gasket and impeller plate rJl2Apply OMC Triple-Guard grease to new impeller a-ring Slide the a-ring down the driveshaft until it contacts the impeller plate