1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126, Page 153Get this manual
Installation 1Remove the nuts from the powerhead adapter studs rv splines withnew O-ring on the driveshaftCoat top surface of 2Install the driveshaft OMC Moly LubeDo not coat the
the driveshaftLubricant here may prevent seating of the driveshaft in the crankshaft3Use OMCUniversal Puller and Lifting Eye, PIN 321537, OMC Lifting Fixture, PIN 396748, to lift the powerheadAttach the body from OMC Universal Puller Kit, PIN 378103, to the flywheel using three Screws, PIN 309492, and three Washers, PIN 307640Flat side of the body must face upThread OMC Lifting Eye, PIN 321537, into the body until taper of tool engages taper in center of the crankshaftTighten the lifting eyeUsing an adequate hoist, lift the powerhead