1996 Johnson Evinrude "ED" 90 CV 88 thru 115 Service Manual, P/N 507126, Page 43Get this manual
Rigging Information Remote Control
To prevent accidental starting of engine, verify that battery cables are disconnected at batteryControl Cable Ident if ication
1Put he control handle into NEUTRAL positionThe throttle cable casing guide will retract completely and the shift cable casing guide will go to the midpoint of its travel
OJ 2As you move the control handle into FORWARD, the shift
cable casing guide must retract and the throttle cable casing guide must begin to extend3As you move the control handle into REVERSE, both casing guides must extend4Identify each control cable for proper installation
Control cable identification and function must be correct before continuing with installation
Throttle Cable 1Remove the rubber grommet from front of lower engine coverRemove cable retainerApply liberal amount of OMC TripleGuard grease to both anchor block pockets
2Extend throttle cable and lubricate with OIVIC Triple-Guard grease