1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 286Get this manual
Disassembly
& Wear safety
glasses while disassembling and assembling manual starters because of rewind spring tension
1Pull the starter rope out far enough to tie slip knot in the ropePry the starter rope anchor out of the handle Remove the handle, release the slip knot, and ease the pulley back until the rewind spring if fully unwound
rn 2Remove the spindle screw nut [[] 3Remove the spindle screwspindle washerspindle
, two spring washersand friction ring
[[] 4Remove the two retaining rings Q) and lift both pawls,
links, and friction plate as an assemblyRemove the spindle bushing Q) and shim
5Hold the pulley in the starter housing while turning the starter over, legs downHold fingers clear ofthe pulley and jar the starter housing against bench to dislodge the rewind spring and pulleyCleaning and Inspection