1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 282Get this manual
Starter Servicing9.915 Removal
i and remove all spark plug leads
"'" 1Avoid accidental starting of engine while servicing; twist 2Loosen starter lockout cam screw several revolutionsRemove the three starter retaining screws3Remove link from lockout camLift starter from powerhead
Disassembly [] 1To service lockout assembly, remove the retaining pin2Remove the plunger, spring, tappet, and cam from the housing, and the screw from the camI
i manual starters because of rewind spring tension
"'" Wear safety glasses while disassembling and assembling
f51 3Pull the starter rope out far enough to tie slipknot in the ropePry the starter rope anchor out of the handleRemove the handle, release the slipknot, and let pulley slowly wind up rope until the rewind spring is completely unwoundf61 4Remove the retaining ring, and lift the pawl and links as an assembly