1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 277Get this manual
9Assemble remaining shims, new tab-lock washer, and impeller nut onto driveshaftTighten impeller nut to 16-18 ftIbs(22-24 Nm)Use new tab-lock washer each time, and bend tabs around driveshaft nut to secure
rn 10.Sealing Compoundhousing to main housingApply OMC Assemble intake Gasket to threads of six retaining screws and
install them finger tight only11Check for any rubbing or binding between the casing liner and impellerIf clearance is greater on one side, verify that the intake housing is centeredTighten screws in crisscross pattern to 10-12 ftIbs(14-16 Nm)12Repeat Step to verify adjustment
Gate Adjustment
1Move remote control handle to NEUTRAL detent
[[] 2Hold reverse gate up and check for proper clearance