1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 272Get this manual
5Apply OMC Gasket Sealing Compound to both impeller plate gasketsBoth gaskets are identicalAlign one gasket on top of the bearing housing
[] 6Position the impeller plateThe side marked "UP" must face up[] 7Position the second impeller plate gasket
[]] rn 8area ofOMC Needle Bearing Assembly Greaseon the Apply to the driveshaftPosition the cam the cam's flat
driveshaftSharp edge driveshaft rotation
of the cam is leading edge during
9Slide the impeller housing down the driveshaftEngage the impeller with the camSerious powerhead damage will result if impeller cam is displaced10Apply OMC Gasket Sealing Compound to threads of the impeller housing screwsInstall and torque the screws to 60-84 inIbs(7-9 Nm)