1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 259Get this manual
23 Assembly
COA3432
COA6226
Make no dry assembliesLubricate bearings, shafts, and gears with OMC Ultra-HPF gearcase lube1Coat the shift rod a-ring with OMC Triple-Guard grease and install in shift rod bushingr:;:;] 2Apply OMC Gasket Sealing Compound to the outside diameter of the bushingInstall the bushing and washer using OMC Shift Rod Bushing Installer, PIN 304515
COA6125
Oil, then install new upper driveshaft bearing in the gearcase using OMC Upper Driveshaft Bearing Installer, PIN 326564Press the bearing into the gearcase against the lettered side of the bearing and until the tool is seated on the gearcase
12514Install two new upper driveshaft seals back to back in the
gearcase using OMC Upper Driveshaft Seal Installer, PIN 330655, attached to OMC Drive Handle, PIN 378737Apply OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing toward the gearcase and the outer seal with lip facing away from the gearcaseApply OMC Triple-Guard grease to the seal lips after installing