1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 203Get this manual
6Install the throttle control plate on outer handleI.i5l 7Place the throttle end cap into inner handleThe tab on the cap goes into the recess of the inner handle G6l 8Push the throttle cable pin through the end of the throttle
cabler:J7l 9Lubricate end ofthe pin, guides, rollers, helix grooves, and inner handle guide slot with OMC Moly LubePlace the guides over the roller pin and into the slots of the inner handlePlace the rollers on the ends of the roller pinr:J7l r:J8l 10Assemble the helix halves on the handle and slide the grip over the helixBe sure the twist-grip's speed indicator line is positioned with the speed range symbol on the handleSnap the grip into placer:J8l 11Turn the idle speed adjustment knob counterclockwise to the minimum slow speed position