1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 167Get this manual
Disassembly To simplify reassembly and wiring installation, layout the various screws and clamps in the order of their proper locationf141 1To remove the water tube grommet, depress tab of the grommetPush the grommet out of the inner exhaust housingf151 2Use OMC Grommet Insta"er, PIN 304148, to install new grommetApply OMC Gasket Sealing Compound to outside diameter of the grommetAlign tab of the grommet with hole in the housing and install grommet1.J6l 3Using diagonal or end cutters, gently pry out and remove the flywheel key f17l f181 4Remove the three lower crankcase head screws and