1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 91Get this manual
m 6Remove components of slow speed needle
7Remove four screws and carburetor body cover
[] 8Remove carburetor body gasket 9Refer to Cleaning and InspectionAll ModelsWhen installing new parts from carburetor rebuild kit, inspect gaskets and compare to original gaskets to ensure all holes are correctly punchedAlso, inspect new gaskets for any loose fibers or particles of gasket materialAssembly
[] 1Install new high speed nozzle gasket]2Install the float and inlet valve assembly]3Install the intermediate air bleed orifice]4Install the high speed orificegasket, and manual primer fuel nipple[] 5Install slow speed needle and spring Turn carefully until it lightly contacts seat Back needle out for initial setting2112 turns[] 6Install the carburetor body cover and gasketTighten the screws in an "X" pattern to torque of 15-22 inIbs(1,6-2,4 Nm)DR4808