1996 Johnson Evinrude "ED" 9.9 thru 30 2-Cylinder Service Manual, P/N 507122, Page 73Get this manual
18 29281 29280
4Install hose over the large nipple of the primer pump housing and connect other end of hose to the alcohol squeeze bottlePlace your thumb over end of the plunger housingSqueeze the alcohol bottle to fill the plunger housingAlcohol should flow freely out of the small nipple, indicating no obstructionsIf no flow is indicated, replace primer pump housing Assembly
1Position the spring and washer on the plunger shaft
2Install two new a-rings and quad ring shaft
onto plunger
3Install new a-ring onto the end cap and position the end cap on the plunger shaftInsert plunger shaft and end cap into primer pump housingReinstall retainer clip