1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 254Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 254

Installation
1Apply ONIC Locquic Primer and OMC Nut Lock to the th reads of the two top starter mounting screws

2Position the starter and install the mounting screwsTorque to 14-16 ftIbs(19-22 Nm)
12611271 12s1

3Attach ground wire and yellowred wire from neutral start switch to small posts on the bottom of the solenoidTighten nuts securely
4Attach red rectifierregulator, engine cable, and power trim cable wires to large solenoid postTighten nut securely5Apply ONIC Locquic Primer and OMC Nut Lock to the th reads of the negative battery cablebottom starter retaining screw

6Attach power trim and connector ground wires to starter flangeTighten screw securely

Back to 1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127