1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 236Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 236

[]] rn 9Assemble remaining shims, new tab-lock washer,

and impeller nut onto driveshaftTorque impeller nut to 16-18 ftIbs(22-24 Nm)Use new tab-lock washer each time, and bend tabs around driveshaft nut to secure10Assemble intake housing to main housingApply OMC Gasket Sealing Compound to threads of six retaining screws and install them finger tight only
Check for any rubbing or binding between the casing liner and impellerIf clearance is greater on one side, verify that the intake housing is centeredTorque screws in crisscross pattern to 10-12 ftIbs(14-16 Nm)

11 Repeat Step to verify adjustment
Gate Adjustment

1Move remote control handle to NEUTRAL detent

Back to 1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127