1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 214Get this manual
28Install new seal in the bearing housing using OIVIC Seal Installer, PI 341439Apply oil to the casing of the seal before installing Install the seal with exposed lip facing away from the bearing housingPress the seal into the housing until the tool seatsApply OIVIC Triple-Guard grease to the seal lips after installing
1421291431 1431 1441
30Apply OIVIC Needle Bearing Assembly Grease to the thrust bearing Position bearing around shoulder on the propeller shaft31Apply OIVIC Needle Bearing Assembly Grease to the thrust washer Place washer in recess of bearing housing32Coat bearing surfaces of propeller shaft with gearcase oilSlide the propeller housing on the propeller shaftUse caution when assembling the propeller shaft in the bearing housingThrust bearing must remain around shoulder on the propeller shaft