1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 196Get this manual
6 DR2061DR2062
DRC5720
6V4Install seal(sl in bearing housing: []] If installing two back-to-back seals, use avIC Seal Installer, PIN 326551Apply OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing toward the bearing housing and install the outer seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after installingIf installing an extended-lip seal, use avIC Seal Installer, PIN 342665Apply oil to the casing of the seal before installingInstall the seal with the exposed lip facing away from the bearing housingPress the seal into the housing until the tool seatsApply avIC Triple-Guard grease to the seal lips after installing
7V6Use avIC Seal Installer, PI 341439, to install new seal in the rear of the bearing housingApply oil to the casing of the seal before installing Install the seal with the exposed lip facing away from the bearing housingPress the seal into the housing until the tool seatsApply OMC Triple-Guard grease to the seal lips after installing141 55