1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 145Get this manual
17 24375
f15l 15If the lower crankshaft is to be resealed or the lower bearing replaced, remove the lower bearing seal housing assembly16Remove the housing a-ringDiscard a-ringr:J7l 17To remove the housing seal, use drift punch as shownDiscard seal18Inspect housing and replace if necessaryf181 19Remove a-ring from crankshaft sleeve and inspect itReplace the a-ring if it is not in good condition20Inspect the crankshaft sleeve and replace, if necessaryTo remove, use OMC Slide Hammer, PIN 432128, and OMC Large Puller Jaws, PIN 432129r:J9l 21 Remove the lower main bearing only if it needs to be replacedUsing external retaining ring pliers, remove the lower bearing retaining ring 1201 22Using an appropriate bearing separator, support the bearing, place separator flats against the bearing and press off the crankshaft23Remove crankcase seal rings for inspection